318 Westley Richards in a Winchester 1895

[R eight]

I’ve got one in 30/06. It’s a great toy. But I could think of better rifles to hunt with.

I think the major issue that you may encounter would be getting reliable magazine feeding.

 

[Grumpy gumpy]

I’ve got one in 30/06. It’s a great toy. But I could think of better rifles to hunt with.

I think the major issue that you may encounter would be getting reliable magazine feeding.

If it feeds 7.62x63( euro version ) it wouldn’t take much to get it to feed 318 wr
Gumpy

 

[PerH]

Rhino make .318 WR bullets also 2 weights of them

 

[BlueFlyer]

Not trying to hijack the thread, but wouldn't the Browning BLR be a more capable doner rifle?

 

[odonata]

I have a Winchester/Miroku 1895 in 30/06...so I was thinking new calibre of 318 Westley Richards or maybe 9.3x62? any one have any ideas on this to add or advice?

If you haven't already seen this, here's a link to blog post of someone who took an 30-06 1895 & converted it to a 35 Whelen. I imagine a conversion to 9.3x62 would be similar. If you had questions, this person might be a good resource.

1895 Browning .35 Whelen beautification project.

An 1895 Winchester chambered in .35 Whelen has been one of my dream rifles for many years. I always watched for a good deal on a .30-06 1895 Browning to convert. A few months back, one showed up on…

762precision.com

It appears that you are contemplating the idea of putting an older (obsolete) cartridge in this rifle but the 318 WR component availability has some challenges. Since the 1895 is also chambered for the rimmed 30-40 Krag & the 405 Winchester, does the 333 Jeffery Flanged have any viability as an alternative? It looks like some components for it might be available:

333 Flanged Cases Bertram Formed Box of 20

www.buffaloarms.com

 

[Bob Nelson 35Whelen]

Then sell them to the desperate folks that need to feed their beasts, why shoot bars of gold needlessly by making more 318s?

@rookhawk
Just encourage more people to buy guns they didn't know they needed, collect your commission then but more 318 components and stop complaining.
Ha Ha Ha Ha Ha Ha Ha
Bob

 

[Bob Nelson 35Whelen]

Show me.

I'd be grateful to see sources for available brass or 250gr SP bullets for the 318WR. To my knowledge, my facts are correct, but I'd be grateful if you prove me wrong.

@rookhawk
You wrong mate. NEVER.
Like me I'm never right but very rare for me to be wrong.
Bob

 

[HunterX]

Couldn’t we try to get @RAVEN ROCKS PRECISION to become the importer for .318 WR brass from Australia? They have a lot of other great obscure brass from Norma. I don’t know how many threads I have seen here with people begging for better access to the Woodleigh bullets and Betram/qualcart brass. Maybe with a big enough order they could get one of those companies to produce a batch of brass/250 grain bullets and ship here?? I have a .318 WR build in my future too.

 

[HunterX]

Also Hawk Bullets in the US will make the .330 bullets. I have preordered 150, for when they do their next run.

 

[PerH]

318 Solid Shank (25 Units) | Rhino Bullets

These are bond-core bullets with a drilled hole in the front part of the bullet and it features a solid copper shank at the rear, which is indestructible. The thick wall jackets attempt to keep petals intact, and expansion gets arrested where the drilled hole stops. The net result is that it...

www.rhinobullets.co.za

They make two models also for .318 also