Backyardsniper
AH elite
If reloading for a 470 N.E. which of the following powders would be a good place to start. These are the powders I have available, I know RL 15 and IMR 4831 are favorites but I do not have access to those at the moment. What I do have is a little H4831sc, a lot of the following H1000, H4350, Varget, CFE223, RL 16, RL 22, Retumbo, and the LGS has a pretty good supply of IMR 3031. The gun in am working with is regulated with Hornady DGS.
For projectiles I have Barnes banded and CEB solids. I have Swift A Frame and CEB Raptors and a bunch of Barnes TSX. I have a bag of 1/2 foam backer rod in the purple bag from Lowe's as well.
I was just curious if anyone had a recommendations for loads that might duplicate the DGS or a known load that has worked with the CEB which is the solid I hope.to regulate it with. I do have a Labradar and I can literally step right out of the garage and blast away from a standing rest off a sand bag on my retaining wall. I have a full 75yd to work with here so that should be sufficient.
Any info would be appreciated.
For projectiles I have Barnes banded and CEB solids. I have Swift A Frame and CEB Raptors and a bunch of Barnes TSX. I have a bag of 1/2 foam backer rod in the purple bag from Lowe's as well.
I was just curious if anyone had a recommendations for loads that might duplicate the DGS or a known load that has worked with the CEB which is the solid I hope.to regulate it with. I do have a Labradar and I can literally step right out of the garage and blast away from a standing rest off a sand bag on my retaining wall. I have a full 75yd to work with here so that should be sufficient.
Any info would be appreciated.