Dip and packing information

Switchback2010

New member
Joined
Aug 17, 2024
Messages
8
Reaction score
4
Hello
Looking for any information on dipping and packing trophies and shipping from South Africa to Ontario Canada
How is the cost determined?
Or is it better to have full taxidermy done in rsa then shipped ?
Any info is appreciated!
Thanks
 
Just in general, the South African shop had rates based on the animals as far as price. Then there is usually a percentage of the D&P for the crating. Shipping will be on top of that.

As to having the work done in South Africa or shipping it home, it's up to you. I've done it both ways. Having the mounts done in South Africa in 2022 was slightly cheaper even with the shipping than it would of cost me at my local taxidermist. But I had the mounts on my walls a good year quicker using the South African taxidermist
 
We don't do any dip and pack stuff. Due to Canada govt regs it is getting harder to find taxidermists who will handle it. My suggestion would be to order bleached skulls (they call them dip & pack skulls), not euro which will have plaques attached (= more $ and more chance of screwing up). Also order your capes dry tanned. Taxidermist here is not bothered with govt regs for fully tanned capes. He will rehydrate the capes and mount to forms. Still, it is always a crap shoot what you will get from Africa. The cape can be screwed up by any one of various handlers: skinner, improperly salted (= hair slippage), improper fleshing (taxidermist), improper tanning, improper storage (taxidermist or shipper), etc. But if you order a skull you'll at least have something better than horns nailed to a board if the cape is no good. Also, be sure to specify you want BLEACHED skulls NOT PAINTED.

I have four tanned capes from Africa waiting for my daughter to mount: two kudu, one nyala, and a black wildebeest. One kudu cape is good for pedestal mount, the other had hair slip. The nyala cape is probably unusable due to missing hair (a very old bull) and a bad nick on the chin of wildebeest will be a challenge to repair. Many skulls were messed up but I was able to pretty much salvage most of them.
20240826_102825.jpg

Skull Hooker above kudu horns is for client's bison skull that we are finishing up. I hung it up to clear work space while jaw is being bleached. Yeah, I know, jaw on a bison will look dopey ... but client is always right. Pfft. I'm sure I'll wind up removing it. For a price. I'm not a big fan of Skull Hookers. Client wanted it.
 
We don't do any dip and pack stuff. Due to Canada govt regs it is getting harder to find taxidermists who will handle it. My suggestion would be to order bleached skulls (they call them dip & pack skulls), not euro which will have plaques attached (= more $ and more chance of screwing up). Also order your capes dry tanned. Taxidermist here is not bothered with govt regs for fully tanned capes. He will rehydrate the capes and mount to forms. Still, it is always a crap shoot what you will get from Africa. The cape can be screwed up by any one of various handlers: skinner, improperly salted (= hair slippage), improper fleshing (taxidermist), improper tanning, improper storage (taxidermist or shipper), etc. But if you order a skull you'll at least have something better than horns nailed to a board if the cape is no good. Also, be sure to specify you want BLEACHED skulls NOT PAINTED.

I have four tanned capes from Africa waiting for my daughter to mount: two kudu, one nyala, and a black wildebeest. One kudu cape is good for pedestal mount, the other had hair slip. The nyala cape is probably unusable due to missing hair (a very old bull) and a bad nick on the chin of wildebeest will be a challenge to repair. Many skulls were messed up but I was able to pretty much salvage most of them.
View attachment 629560
Skull Hooker above kudu horns is for client's bison skull that we are finishing up. I hung it up to clear work space while jaw is being bleached. Yeah, I know, jaw on a bison will look dopey ... but client is always right. Pfft. I'm sure I'll wind up removing it. For a price. I'm not a big fan of Skull Hookers. Client wanted it.
Thanks for the info!
Thinking it may be better to have the taxidermy done there
That’s how I did it last time
It took a long time to get it back and the quality isn’t the greatest but at least it all showed !
I will talk with the outfitter as well
Thanks !
 
Thanks for the info!
Thinking it may be better to have the taxidermy done there
That’s how I did it last time
It took a long time to get it back and the quality isn’t the greatest but at least it all showed !
I will talk with the outfitter as well
Thanks !
Be careful! Shipping costs have increased dramatically the last couple of years. Getting shoulder/pedestal mounts shipped across the pond has become plum ridiculous. Another reason to go with skulls and tanned capes. A dozen animals can come over in the same small crate. You can still expect $2K for shipping. Trophies on forms will be panty-dropper expensive. Then you don't know what you'll get. If it's crap, you're just screwed. Can't take a skull mount out of a shoulder mount. Skull is gone. Then the best you can do to salvage is a cap mount of horns stuck on a board. Meah! If the tanned cape is shit, your taxidermist here will/SHOULD tell you in time to cut your losses and hang up the euro skull. Taxidermist can then keep his eye open for replacement cape. Would still be a significant financial setback but much better than paying for shoulder mount in Africa AND huge freight bill only to find the mounts are dumpster material.
 
Be careful! Shipping costs have increased dramatically the last couple of years. Getting shoulder/pedestal mounts shipped across the pond has become plum ridiculous. Another reason to go with skulls and tanned capes. A dozen animals can come over in the same small crate. You can still expect $2K for shipping. Trophies on forms will be panty-dropper expensive. Then you don't know what you'll get. If it's crap, you're just screwed. Can't take a skull mount out of a shoulder mount. Skull is gone. Then the best you can do to salvage is a cap mount of horns stuck on a board. Meah! If the tanned cape is shit, your taxidermist here will/SHOULD tell you in time to cut your losses and hang up the euro skull. Taxidermist can then keep his eye open for replacement cape. Would still be a significant financial setback but much better than paying for shoulder mount in Africa AND huge freight bill only to find the mounts are dumpster material.
Good point !
 
Hello
Looking for any information on dipping and packing trophies and shipping from South Africa to Ontario Canada
How is the cost determined?
Or is it better to have full taxidermy done in rsa then shipped ?
Any info is appreciated!
Thanks
Costs would depend on what you're doing to your trophies and what they are. For example a full giraffe would cost more than a duiker.

Would not recommend having your work done or any tanning in RSA. IMO quality of work is not there and it just looks terrible. As noted above shipping costs are high and would estimate your savings will most likely be lost in the shipping/freight costs alone.

Go with someone that knows the process and specializes in this stuff, let them handle it. In my experience a few bucks in the beginning can save you a lot down the line.
 

Forum statistics

Threads
57,895
Messages
1,242,469
Members
102,277
Latest member
Gold Ölmühle Zürich
 

 

 

Latest posts

Latest profile posts

Grz63 wrote on Werty's profile.
(cont'd)
Rockies museum,
CM Russel museum and lewis and Clark interpretative center
Horseback riding in Summer star ranch
Charlo bison range and Garnet ghost town
Flathead lake, road to the sun and hiking in Glacier NP
and back to SLC (via Ogden and Logan)
Grz63 wrote on Werty's profile.
Good Morning,
I plan to visit MT next Sept.
May I ask you to give me your comments; do I forget something ? are my choices worthy ? Thank you in advance
Philippe (France)

Start in Billings, Then visit little big horn battlefield,
MT grizzly encounter,
a hot springs (do you have good spots ?)
Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
 
Top