My m70 safety is stuck in the fire position

[Muskox]

How do I fix this?

 

[Wyatt Smith]

I had a safety lever break one time, it then got stuck in fire. Does it sit at the same angle as normal? Mine was just a bit off.
I would remove the bolt aground if possible and inspect everything.

 

[WAB]

Agreed. Assuming the rifle is unloaded, attempt to remove and disassemble the bolt. This should reveal whether you have a broken safety or perhaps some odd misalignment.

 

[rookhawk]

Is the bolt in the rifle? If so, it should be able to be cocked and moved to the half-safe and all-safe position.

If the bolt was sprung outside of the rifle, it must be hand cocked very carefully while an assistant puts it into safe position. It can then be reinstalled into the rifle.