North Fork Technologies Bullets Ballistics Tests

[North Fork Technologies]

We would like to thank cartridge_cuff_guy, for reviewing our products. Please see this ballistics test:

You can also find this review on our NF YouTube channel:

https://www.youtube.com/@northforkbullet/community

 

[Mike Van Horn]

Great performance

 

[Puddle]

As soon as the reviewer mentioned he had tested the 180 grain Semi Spitzer I switched to watch that video. He was running them from a .30-06 22.4" barrel @ ~2,600 fps. I'm testing them from a 24" barrel @ just over 2,700 fps and easily staying under SAAMI max pressures. I'm headed out this morning to continue testing which load is most consistent.

Thanks for the post!

 

[North Fork Technologies]

Part 2

 

[North Fork Technologies]

 

[Aaron.F]

Great videos for what appears to be damn near perfect bullets. I really like that he shows how the bullet performs at 100 yards. As a side note, it also shows how bullet construction has more to do with penetration and how section density has very little to do with actual penetration as well.

 

[mauserhunter]

Looking good I've got to try some of these in my 45-70 Siamese mauser when I can afford some lol, bet those cup point make a heck of a smack on a animal when it hits.

 

[North Fork Technologies]

Great videos for what appears to be damn near perfect bullets. I really like that he shows how the bullet performs at 100 yards. As a side note, it also shows how bullet construction has more to do with penetration and how section density has very little to do with actual penetration as well.

Thanks for thoose words.
We updated our webpage so now can you go in and register an account and buy our products direct from our webpage. www.northforkbullets.com

 

[Certus]

Great videos for what appears to be damn near perfect bullets. I really like that he shows how the bullet performs at 100 yards. As a side note, it also shows how bullet construction has more to do with penetration and how section density has very little to do with actual penetration as well.

These more modern bullet designs certainly change the old rules for sure.

 

[leslie hetrick]

i have found hornady cup-core flat tip or hollow point 300-350 gr bullets at 1900-2000 fps have been very good bullets for non dangerous game at a reasonable cost in a 95 marlin- ruger #3- new winchester high wall

 

[375Fox]

I’ve been watching a lot of this guy’s videos the last few weeks. He’s done some really interesting tests. I like how he recognized the difference between standard bullets and a premium bullet like North Fork right away with the first test. I think that was with a 308.

 

[North Fork Technologies]

Part 3

 

[Puddle]

His follow-on video test of the 9.3mm Mauser 232 grain NF CPX bullet was pretty interesting.
He loaded them to 286 grain MVs, which I suppose is a useful test, but I would have liked to have seen them loaded to at least another 150 fps MV to give them a workout in the gel blocks.

 

[dchum]

Where can I get some loaded ammo?

Do any of the boutique loaders offer loaded ammunition with north fork? I don’t think I see it on henderhsots.

Thanks

 

[1dirthawker]

for what its worth,

i think north fork softs are the best soft bullets. made right now. certainly in the class of the swift a frame, cutting edge and barnes.

i have used both barnes and north fork bullets for a long time and have pretty much switched from the X bullets to the north forks.

i have shot moose, deer, caribou with the barnes.

i have shot moose, caribou, brown bear, cape buffalo, and wildebeest with the north fork ss. the barnes bullets are great (they DO need to be pushed fast or don't open as well) i just feel the north forks are a tad better.

if you can get em, buy em and load em up, they will do anything a soft bullet is supposed to do.

 

[North Fork Technologies]

Where can I get some loaded ammo?

Do any of the boutique loaders offer loaded ammunition with north fork? I don’t think I see it on henderhsots.

Thanks

We work on this matter. We cooperate with some customrealoaders for the moment. You can talk with Lonnie Cribb at Superiour Ammunition and he will make the caliber you need.

 

[375Fox]

Where can I get some loaded ammo?

Do any of the boutique loaders offer loaded ammunition with north fork? I don’t think I see it on henderhsots.

Thanks

You can also get some loadings from Pendleton ammunition. At least in 300 win mag

 

[Hunting Hitman]

You can also get some loadings from Pendleton ammunition. At least in 300 win mag

I also know they make 375 H&H and are working up 458 Lott load.

HH

 

[dchum]

I also know they make 375 H&H and are working up 458 Lott load.

HH

Yep they have it in 308 win and 30-06 both in the 165 and 180.
Yippee!

 

[North Fork Technologies]

Part 4