SAFETY WARNING!

I just can't see how a traditional bolt action is safer, the lockup is weaker if anything.
Strength is only one part of the equation, how a gun I desigen to protect the shooter if something fails is just as important. And there lies the beauty of the m98!
When working the Blaser R93 is probably 5-10 times stronger then it need to be. Good. Helps nothing when it fails.
 
as the above post says, you have to respect the failsafe aspect of the mauser 98 design.
the fact that an action designed in the 1800s can function quite safely with such rounds as 7mm rem mag for a lifetime speaks loudly for both the design and the safety if something goes wrong.
metals then were nothing like metals today.
if they started to fail, they set back rather than letting go.
they had a safety lug at the root of the bolt handle.
they directed gas away from the shooter.
an ammount of thought obviously went into what would happen under less than ideal conditions, and was engineered in.
somewhere in this thread it mentions a test done in australia of a straight pull action.
it mentions fingers breaking off one by one.
could these fingers have been not bearing evenly in their recesses, allowing one or a few to take all the thrust?
if one lug is not bearing in a mauser, the other one will set back until both bear, taking equal load.
soft steel does have some benefits.
bruce.
 
I don’t know why this post still exists. It was started years ago about some failures with the Blaser R93 which is no longer made. Since so few of them had a problem I am certain there are underlying reason for the failure that are out of Blasers control.
Kill this once and for all!
 
Interesting video on guns with obstructed barrels blowing up (or not), shot at 4000 frames per second.


That test is 100% bullshit. If you believe that I can sell you the USS Missouri going cheap. Questions to ask, what ammo was used in each test? How many slugs were in each barrel? How tight was the vice done up on each rifle. Look how far back each rifle recoils.

It was the barrel that went not the action. The Rem 700 actions have been PROVEN to be some of the strongest going. Period.

That video has been discredited that many times since it first came out it is not funny.
 
Straight pull bolt action is much quicker on the second shot. The only thing faster with the second shot is a double rifle.
No disrespect, as we are just sharing ideas here but, please define: “much quicker”.
 
Fellow Rifle Grumps,

Ok so, hopefully you Blazer guys can forgive me for this smartass reply.
It is meant only in jest, not malice.
But if you can’t, that’s ok too.
No doubt I’ve had worse.

Either way, the below attached photos are depicting the perfect companion piece hand gun, to compliment today’s straight pull rifle mechanisms.:ROFLMAO:

Furthermore, to parry any potential thrusts at my gizzard, so to speak, I always find humor if not comfort, in the slings and arrows launched toward me, for my out of touch prune faced old fart notions.
(Not the least of which is my affection for fixed, low power scopes, with standard crosshairs reticule).

Best Regards,
Velo Dog.
 

Attachments

  • IMG_0685.png
    IMG_0685.png
    867.9 KB · Views: 3
  • IMG_0683.png
    IMG_0683.png
    900.2 KB · Views: 3
  • IMG_0682.png
    IMG_0682.png
    2.1 MB · Views: 4
  • IMG_0679.png
    IMG_0679.png
    2.3 MB · Views: 4
  • IMG_0678.png
    IMG_0678.png
    2.5 MB · Views: 3
  • IMG_0681.png
    IMG_0681.png
    1.4 MB · Views: 4
Last edited:

Forum statistics

Threads
57,895
Messages
1,242,468
Members
102,275
Latest member
Amp Wellbeing
 

 

 

Latest posts

Latest profile posts

Grz63 wrote on Werty's profile.
(cont'd)
Rockies museum,
CM Russel museum and lewis and Clark interpretative center
Horseback riding in Summer star ranch
Charlo bison range and Garnet ghost town
Flathead lake, road to the sun and hiking in Glacier NP
and back to SLC (via Ogden and Logan)
Grz63 wrote on Werty's profile.
Good Morning,
I plan to visit MT next Sept.
May I ask you to give me your comments; do I forget something ? are my choices worthy ? Thank you in advance
Philippe (France)

Start in Billings, Then visit little big horn battlefield,
MT grizzly encounter,
a hot springs (do you have good spots ?)
Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
 
Top