When loading the 500 Jeffery is a filler (foam plug) needed?

SkullKeeper

AH elite
Joined
Feb 1, 2021
Messages
1,247
Reaction score
2,436
Location
Virginia
Media
35
Hunting reports
Africa
6
Hunted
RSA, Tanzania, Zambia
Starting to load for this and was curious. Thank you for any and all help!
 
I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.
 
I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.
@DWB Maybe a short video or photos demonstrating how you make the plugs?
 
@DWB Maybe a short video or photos demonstrating how you make the plugs?

Just drive and twist the case into the foam and you will easily cut the foam. You can source closed cell foam very cheaply in numerous thicknesses.
 
I make my own foam fillers using pool noodles and an unsized 585Nyathi case that I sharpened the mouth of.

Cuts is nice and round.

Only loaded from 99 to 109gr so far and used fillers every time.

I shoot monolithic bullets, so they are on the longer side. But so far so good.
What powder are you using ? I’m going to try H4350 and RL15.
 
Playing around between N540 and N550.

Seems like N550 will be my go to
 
@SkullKeeper
you might also consider bulky powders n165 (similar to @DWB or h4831sc (AA manual has load data with pressure for the h4831). I use either in my 505 Gibbs. H4350 is probably a better choice, more efficient, slightly less than 100% load density.
Steve
 

Forum statistics

Threads
60,483
Messages
1,318,301
Members
111,548
Latest member
EveSkiller
 

 

 

Latest posts

Latest profile posts

Rattler1 wrote on trperk1's profile.
trperk1, I bought the Kimber Caprivi 375 back in an earlier post. You attached a target with an impressive three rounds touching 100 yards. I took the 2x10 VX5 off and put a VX6 HD Gen 2 1x6x24 Duplex Firedot on the rifle. It's definitely a shooter curious what loads you used for the group. Loving this rifle so fun to shoot. Africa 2026 Mozambique. Buff and PG. Any info appreciated.
Ready for the hunt with HTK Safaris
Treemantwo wrote on Jager Waffen74's profile.
Hello:
I’ll take the .375 Whitworth for $1,150 if the deal falls through.
Thanks .
Derek
[redacted]
 
Top