375 flanged mag nitro recipe

Chill645

AH member
Joined
Sep 8, 2022
Messages
23
Reaction score
29
Wanted run this by other, got a recipe from jj. 300gr bullet with 72-73gr of IMR 4350
270gr bullet with 75gr of IMR 4350
All with CCi 250 LMR primers.

Said it was what he used
Wanted to get an opinion weather load seem high for a flanged load. Weather it seem more of a belted load.
 
I use Vihtavuori N160 for my doublerifle in .375 Flanged Magnum, my recipe is 77 grains N160, Norma cases, Federal 215 Large Rifle Magnum and Hornady DGX Bonded 300 grains bullets.

It is the very same recipe that the gun was regulated by the maker.
 
Made up and test the load it shot great, accuracy not sure shot a water jug it exploded pretty good. But a thumper still with 270gr speer
 
An accurate chronograph is a reloaders best friend. If you are over the max V shown in the reloading manuals, chances are you are over max pressure as well.
 
Like to know which reloading manuals have 375 flanged magnum in them, as I can't find a recipe from any local books(USA). Not to worried as I got the recipe from JJ perodeau the gunsmith. I will eventually chrono the load only shot two loads so far and was shooting for fun and breaking the 7 month wait for the first shot with it
 
IMG_1926.jpg

IMG_1927.jpg

IMG_1928.jpg
 
Thank for the info, I will eventually get around to chronoing the recipe from JJ, if it high it nice to have other recipes to look to. Beside I'm not taking it to African right now so it doesn't need to be buffalo down and shoulder punching load.
 
4350 has always been a favorite of mine, but never got the best accuracy out of it in the 375 or flanged. (Did get the highest velocity) IMR 4064 has been a better powder for me. 67 grains in the standard, 64 in the flanged.....(with 300's). Best of luck with your loads.............FWB
 
One thing I did notice with the IMR 4350 is it is near or above the shoulder level so not alot of space to seat the bullet.
 

Forum statistics

Threads
57,920
Messages
1,243,048
Members
102,329
Latest member
JamesBondKotas
 

 

 

Latest profile posts

Grz63 wrote on Werty's profile.
(cont'd)
Rockies museum,
CM Russel museum and lewis and Clark interpretative center
Horseback riding in Summer star ranch
Charlo bison range and Garnet ghost town
Flathead lake, road to the sun and hiking in Glacier NP
and back to SLC (via Ogden and Logan)
Grz63 wrote on Werty's profile.
Good Morning,
I plan to visit MT next Sept.
May I ask you to give me your comments; do I forget something ? are my choices worthy ? Thank you in advance
Philippe (France)

Start in Billings, Then visit little big horn battlefield,
MT grizzly encounter,
a hot springs (do you have good spots ?)
Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
 
Top