.375 H&H cast bullet info......

[Mr. 16 gauge]

I was given a handful of cast lead bullets in .375, and I would like to try and find a load for my .375 H&H that would duplicate (or surpass) .38-55 ballistics for hunting deer/hog. I have a lot of data using pistol powders (most of it obsolete), and if possible, would like to load it with rifle powders (I have a big supply of IMR4064 and IMR4320). I also have H4895, IMR4350, H414, and a little Reloader 19.
Anyone have any good loads they would like to share? I don't plan on buying a mold until I find a good load......tried to find a good load for my .338 Win. mag w/o success, so hopefully this rifle will shoot them (cast bullets) better..............

 

[dfm]

What weight are the bullets?

 

[Mr. 16 gauge]

What weight are the bullets?

Sorry....meant to post that info; two different bullets: one is a gas check that weighs in at 285; the other is a flat base that weighs in about 253 grains.

 

[dfm]

249.0gr. flat base:

AA 5744 - 25.5grs. 1454fps / 35.8grs. 1910fps

264.0gr. w/gas check:

AA 5744 - 27.0grs. 1461fps. / 34.0grs. 1736fps

These loads are taken directly from the Lyman Cast Bullet manual.

None of the powders you have on hand are listed in their data. And while the bullet weights aren't quite exactly what you have it shouldn't be too hard to adapt their data to yours.

Try AA 5744. It's not position sensitive and no filler(s) is needed. In fact AA says NOT to use a filler. I use it in my 450/400 Ruger No.1 and it keeps me shooting cheaply year 'round from range work to effective field use, elk included.

 

[tarbe]

The powders you listed are too slow for pushing a 249gr cast at 38-55 velocity.

 

[High Desert Hunter]

I would use the H4895, you can find jacketed load data for those bullet weights, and reduce the load to 60% of what is published. I use IMR4198 in my cast bullet loads for the 375 Ruger, and have had very good success with my 350gr cast, and a new bullet I am casting which drops a 271gr hollowpoint. I see that 35 grains of IMR 4198 gives 1800 fps with a 264gr cast bullet in the H&H.

 

[High Desert Hunter]

marks: max load; compressed powder charge; 46,700 psi; 3.575" OAL
264 Cast #375449 gas check IMR SR-4759 21.0 1372
Remarks: sugg. start load; 3.440" OAL
264 Cast #375449 gas check IMR SR-4759 32.0 1858
Remarks: max load; 3.440" OAL
264 Cast #375449 gas check Accurate AAC-5744 27.0 1461
Remarks: sugg. start load; 3.440" OAL
264 Cast #375449 gas check Accurate AAC-5744 34.0 1736
Remarks: max load; 3.440" OAL
264 Cast #375449 gas check IMR IMR-4198 24.0 1387
Remarks: sugg. start load; 3.440" OAL
264 Cast #375449 gas check IMR IMR-4198 35.0 1813
Remarks: max load; 3.440" OAL; potentially most accurate load
264 Cast #375449 gas check Alliant RL-7 26.0 1422
Remarks: sugg. start load; 3.440" OAL
264 Cast #375449 gas check Alliant RL-7 34.0 1698
Remarks: max load; 3.440" OAL
335 Cast #378674 IMR SR-4759 23.0 1353
Remarks: sugg. start load; 3.570" OAL
335 Cast #378674 IMR SR-4759 32.5 1759
Remarks: max load; 3.570" OAL
335 Cast #378674 IMR IMR-4198 25.0 1314
Remarks: sugg. start load; 3.570" OAL
335 Cast #378674 IMR IMR-4198 36.0 1717
Remarks: max load; 3.570" OAL
335 Cast #378674 Accurate AAC-5744 26.0 1329
Remarks: sugg. start load; 3.570" OAL
335 Cast #378674 Accurate AAC-5744 36.0 1725
Remarks: max load; 3.570" OAL; potentially most accurate load
335 Cast #378674 Alliant RL-7 27.0 1367
Remarks: sugg. start load; 3.570" OAL
335 Cast #378674 Alliant RL-7 37.5 1726
Remarks: max load; 3.570" OAL

Read more: http://www.loaddata.com/members/sea...ader=.37 Caliber Reloading Data#ixzz3ii8VPRQl

 

[Mr. 16 gauge]

Thank you HDH.....the info is much appreciated.