Custom 458 Win Mag For Sale

pvanwyk

Bronze supporter
New member
Joined
Oct 5, 2021
Messages
13
Reaction score
46
Media
1
Custom 458 Win Mag built on Mauser action. Lightly used with one or two small nicks in the woodwork. Barrel is ported, receiver is drilled and tapped for scope mount (included in deal). Custom peep sights. $2,100 + shipping (lower 48 only)

Have decided to stick to my 450/400 double as my primary big caliber

IMG_0953.jpeg
IMG_0963.jpeg
IMG_1368.jpeg
IMG_1375.jpeg
IMG_0957.jpeg
 
Last edited by a moderator:
Nice rifle and good pictures.

If I may suggest, to help sell your rifle, include some more detailed information about yourself, and the rifle.

You will find that members of AH are good people and are savvy regarding online sales. Unfortunately, some have been scammed (I'm lucky so far), and rightly need validation.

To enhance selling your rifle:

Suggested information:
  1. Your online activity, on other sites with feedback, especially regarding past successful sales.
  2. Original maker of the rifle, from the factory, (Oberndorf, DWM, Erfurt, Brno) etc.
  3. Gunsmith(s) that performed the work: barreling, porting, safety, trigger, bottom metal, etc. include ALL details.
  4. Barrel Length, LOP, Recoil Pad make, Trigger, Safety, etc. All information is valuable, and will help you get best dollar, and ensure a buyer gets a great rifle.
  5. Stock: It has very nice figure: list the stock maker, checkering LPI, type of finish. Is it glassed bedded, wrist reinforced, internal cross-bolted?
  6. Any preferred cartridge loads, factory or handloads. (Important). Provide as much information as you can.
  7. Pictures of targets with preferred loads (factory or handloads), dated.
With past experience, the above data inclusions will facilitate selling good rifles to good buyers.

Good choice staying with your 450/400 Nitro. A favorite of mine. Tell us about that rifle.

Good Luck With the Sale.

CR
 
Custom 458 Win Mag built on Mauser action. Lightly used with one or two small nicks in the woodwork. Barrel is ported, receiver is drilled and tapped for scope mount (included in deal). Custom peep sights. $2,100 + shipping (lower 48 only)

Have decided to stick to my 450/400 double as my primary big caliber

View attachment 602655View attachment 602656View attachment 602657View attachment 602658View attachment 602659
thank you all for the feedback. Herewith more details on the rifle and myself.
- rifle was bought at an auction and i've fired minimal rounds
- length of pull is just over 14"
- from markings the trigger is a Timney
- Barrel length is 25"
- the porting runs a length of 3"
- Unsure of the action but it looks to be FN
- the wooden stock has been beautifully inletted to allow for the peep sights
- i've borescoped the barrel and everything looks excellent (not surprising considering cost of 458 ammunition and recoil)

I don't have a huge internet presence but you can find submissions on brianenos.com (pistol shooting), longrangeshooting.com and M1A forums under the handle of 2scoops. After a recent safari trip with my Krieghoff 450/400 and seeing the performance on large game, i've come to the realization that the 450/400 has everything i need (and it's a double :) ) with much less recoil. Previous dealings on AH include the purchase of a 9.3x62 from AZDAVE

Houston based if anyone locally would like to view the rifle
 
Nice rifle and good pictures.

If I may suggest, to help sell your rifle, include some more detailed information about yourself, and the rifle.

You will find that members of AH are good people and are savvy regarding online sales. Unfortunately, some have been scammed (I'm lucky so far), and rightly need validation.

To enhance selling your rifle:

Suggested information:
  1. Your online activity, on other sites with feedback, especially regarding past successful sales.
  2. Original maker of the rifle, from the factory, (Oberndorf, DWM, Erfurt, Brno) etc.
  3. Gunsmith(s) that performed the work: barreling, porting, safety, trigger, bottom metal, etc. include ALL details.
  4. Barrel Length, LOP, Recoil Pad make, Trigger, Safety, etc. All information is valuable, and will help you get best dollar, and ensure a buyer gets a great rifle.
  5. Stock: It has very nice figure: list the stock maker, checkering LPI, type of finish. Is it glassed bedded, wrist reinforced, internal cross-bolted?
  6. Any preferred cartridge loads, factory or handloads. (Important). Provide as much information as you can.
  7. Pictures of targets with preferred loads (factory or handloads), dated.
With past experience, the above data inclusions will facilitate selling good rifles to good buyers.

Good choice staying with your 450/400 Nitro. A favorite of mine. Tell us about that rifle.

Good Luck With the Sale.

CR
appreciate the feedback. Additional details included
 
appreciate the feedback. Additional details included
Excellent details. A Krieghoff double is a great rifle, this brand the first double I got to shoot and led me down that road. 450/400 is a favorite round, understand why you are selling the.458.
It is a nice rifle and the wood is very nice.
Good luck with the sale.
 
p.s. Gun may have been built by, or stock-only by Paul Jaeger. His (stockmaker Fritz Voight's) shadowline, fine checkering and interestingly-shaped pistol grip was a trademark. 25" bbl (like the 64 cm factory Steyr/25.1") likely originated in Europe. Appears to be quite the antique.
 

Forum statistics

Threads
58,334
Messages
1,257,139
Members
104,355
Latest member
CherieHeym
 

 

 

Latest posts

Latest profile posts

Badboymelvin wrote on BlueFlyer's profile.
Hey mate,
How are you?
Have really enjoyed reading your thread on the 416WSM... really good stuff!
Hey, I noticed that you were at the SSAA Eagle Park range... where about in Australia are you?
Just asking because l'm based in Geelong and l frequent Eagle Park a bit too.
Next time your down, let me know if you want to catch up and say hi (y)
Take care bud
Russ
Hyde Hunter wrote on MissingAfrica's profile.
may I suggest Intaba Safaris in the East Cape by Port Elizabeth, Eugene is a great guy, 2 of us will be there April 6th to April 14th. he does cull hunts(that's what I am doing) and if you go to his web site he is and offering daily fees of 200.00 and good cull prices. Thanks Jim
Everyone always thinks about the worst thing that can happen, maybe ask yourself what's the best outcome that could happen?
Very inquisitive warthogs
faa538b2-dd82-4f5c-ba13-e50688c53d55.jpeg
c0583067-e4e9-442b-b084-04c7b7651182.jpeg
Big areas means BIG ELAND BULLS!!
d5fd1546-d747-4625-b730-e8f35d4a4fed.jpeg
 
Top