Magnum Primers

rwp315

AH senior member
Joined
Dec 8, 2023
Messages
79
Reaction score
79
Articles
3
Which manufacturer of magnum primers are recommended for .375 and larger calibers?

If I can find any!

Thanks
 
Depending on what powder you might get away with using a normal large rifle primer. If you can easily get them then load a couple and see. Your SD and ES numbers will tell you if you’re getting good ignition. Now if I’m using magnum primers my go to is always Federal GM215M primers.
 
Depending on what powder you might get away with using a normal large rifle primer. If you can easily get them then load a couple and see. Your SD and ES numbers will tell you if you’re getting good ignition. Now if I’m using magnum primers my go to is always Federal GM215M primers.
This is what I have right now, waiting for others to become available.

So magnum primers May not be required? Are there any reloading manuals that actually provide the LR/LR magnum loading data?

Thanks again.
 
CCI 250 typically has the best SDs and consequently the reason why they produce the best groups in every rifle I own including non-magnum rifles they actually improve loads in some non-magnum cartridges
 
This is what I have right now, waiting for others to become available.

So magnum primers May not be required? Are there any reloading manuals that actually provide the LR/LR magnum loading data?

Thanks again.

If the loading book you’re using calls for LR magnum primers and if all you have or can find LR primers I’d just start with the low charge and work up from there. Magnum primers could in theory give you higher velocity than standard LR primers.
 
Of all I've tried Federal Magnum 215 are the best. Pity they're practically non existent presently.
 
Federal large rifle magnum match with VV powders, CCI 250s with all others.
 
Federal 215 (or match)
Rem LRM
WW LRM
CCI magnum

Not a fan of using LR in a magnum (70+ grains of powder)

When you find them, buy enough. Don't let a few cents apiece stop you. When you find a deal - let us know!

Last week I found some RemLRM at the LGS for $100/1,000.
 
I use WLRM. I also have CCI and Federals as backup in the event I can’t find them.
 
CCI 250 OR Fed 215. I have never been able to come up with chrony data to support one over the other. As well as grouping.
In today’s world you are fortunate to find either.
Good luck.
 
Got to ask why cant we get primers , been 4 years ?
That's a fair question. Been along time since any semblance of normal supplies. I know the answer is tied up in current upheaval around the world.
Down here in our part of the world a few small shipments of uncommon brands have landed largely unannounced and have been snapped up almost as soon as they hit the shelves. All bloody expensive but they still disappear quickly. That's why shop shelves continue to have nothing.
Many shooters, the fortunate ones, hold quite good supplies while others struggle to find enough to load even a few rounds.
From info I see online it seems most of the world is in similar shape. If my reading is correct it may be a little better in the USA but basically the situation there is also one of shortage, at least compared to "normal".
 
I use Federal 215 for my Large capacity magnum loads, .375 H&H, .458 Win. Mag., 460 Whby Mag, even 300 Win.Mag. They have always worked very well. The last few years has been a dry hole for these primers and I was getting down pretty low. Fortunately a new Scheels opened near where I live and my daughter and husband were able to get some for me. It should be enough to get me through the rest of my "magnum" shooting career. :)
 

Forum statistics

Threads
57,913
Messages
1,242,906
Members
102,314
Latest member
Charlene D
 

 

 

Latest posts

Latest profile posts

Grz63 wrote on Werty's profile.
(cont'd)
Rockies museum,
CM Russel museum and lewis and Clark interpretative center
Horseback riding in Summer star ranch
Charlo bison range and Garnet ghost town
Flathead lake, road to the sun and hiking in Glacier NP
and back to SLC (via Ogden and Logan)
Grz63 wrote on Werty's profile.
Good Morning,
I plan to visit MT next Sept.
May I ask you to give me your comments; do I forget something ? are my choices worthy ? Thank you in advance
Philippe (France)

Start in Billings, Then visit little big horn battlefield,
MT grizzly encounter,
a hot springs (do you have good spots ?)
Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
 
Top