Wanted 350 Rigby Dies

[cwhuntsalot]

I make cartridge display boards and am slowly trying to acquire dies for as many cartridges that will fit my RCBS RC IV press. I have the 1" x 14 adapter for 500 Jeffery and 505 Gibbs, but they are the biggest I'll be able to use. I have 15 or more that I don't have dies for that I have to try and use a mallet to tap the bullets in, but sometimes it tips to the side and oblongs the neck. Most of the time I can turn the wobble to the back so it can't be seen on the display, but sometimes I can't and have to throw a $10 piece of brass in the recycle bucket.
Thanx

 

[S Bertram]

I have an extra set of 400-350 Rigby dies, made in Australia or New Zealand, not maker marked 110$ delivered. I have quite a few other die sets as well as a bunch of Nitro express brass in various calibers.

 

[cwhuntsalot]

Sir, Thank you for your response. I'm not sure what a 400-350 Rigby is, but my brass is stamped 350 Rigby not 400-350 so I think I'll pass on the dies. I am looking for quite a few others though:

240 H&H
30 Super Flanged H&H
318 WR
350 Rigby
360 NE
400/360 WR
360 NE #2
9.3 BS
400 NE
425 WR
500/416 NE
500/465 NE
470 Capstick
475 NE
476 WR
505 Gibbs
500 Jeffery

The brass I am in most need of is:

318 WR
360 NE 2 1/4"
360 NE #2 3"
375 Wby
375 H&H Imp
400 NE 3"
460 ASQ Short
450 Ackley
460 G&A
470 NE
475 NE
476 WR
505 Empire
505 Gibbs
500 Jeffery
500 NE
577 NE
600 NE
700 NE

I'm saving for a second Safari to South Africa so my budget doesn't allow me much play money each month. If you're interested maybe we could work some sort of barter for one of my display boards toward some of your goodies.

Please let me know if you have anything I could use.

Thank You for your time
Curtis

 

[cwhuntsalot]

Sorry, I thought that was going into a private conversation not to the open forum. I'm new to using the site and haven't quite figured out how to use everything
Curtis

 

[S Bertram]

I have 240 brass(belted and flanged), 360 2&1/4" brass, 500 ne brass, 470 brass, also 360 dies, maybe a set of 240 H&H dies as well. I would be more interested in selling than trading.
Steve

 

[Tintin]

I have an extra set of 400-350 Rigby dies, made in Australia or New Zealand, not maker marked 110$ delivered. I have quite a few other die sets as well as a bunch of Nitro express brass in various calibers.

Hi @S Bertram - I'll take the 400-350 Rigby dies - have sent you a PM

 

[Huvius]

Are all of your cases properly headstamped?
You may be better off asking folks with the brass, bullets and dies to load dummy rounds for you rather than buying all of the dies.
Many of us don't want to sell the rare dies just because you never know when another rifle will enter your life...

 

[cwhuntsalot]

Found a set of new CH dies in Australia. Thanks for helping out
Curtis

 

[bashaw]

I'm assuming you sell the display, if you do what is the price for a display?

 

[cwhuntsalot]

I'm assuming you sell the display, if you do what is the price for a display?

I have 63 patterns from 6"x9' with 30 pieces to 17"X28" with 187 pieces. Prices vary from $175 for the 6x9 to $525 for the 17x28. Depending on which pattern you choose the cartridges on the boards range from 25 Auto to 700 Nitro Express and 50 BMG.