Wanted: CZ 602 front recoil lug and screws

[Green Chile]

I need this to finish up a Zim Parks barreled action in 458. Only looking to do business with members who are not new and have been active here.

 

[teklanika_ray]

My gunsmith has a connection. He has gotten two of these for me for CZ 550 barrels in the past two months. Some guy he knows CNC milled them. Not sure if he is a member, or if the machinist is a member, and I am a relatively new member (though I have been fairly active). Let me know if you would like his name.

 

[Brandon.Gleason]

Is this the same part that's used in the CZ 550?

 

[Fatback]

I will say I had a great interaction with @teklanika_ray a couple months ago when he bought a 375 barrel from me. Good communication and paid quickly. I would deal with him on any future deals without hesitation. Don’t know anything about where he is getting his parts but he is solid.

 

[Green Chile]

I'm not sure if it's the same as the 550 part?

 

[Green Chile]

My gunsmith has a connection. He has gotten two of these for me for CZ 550 barrels in the past two months. Some guy he knows CNC milled them. Not sure if he is a member, or if the machinist is a member, and I am a relatively new member (though I have been fairly active). Let me know if you would like his name.

Yes, I would be interested in knowing his name. Thanks.

 

[Green Chile]

I do not know if the 550 parts are the same. Any answers on that?

Here are the photos of the gun being built....

recoil lug fits into this T slot on the barrel

then into this stock recess...

 

[teklanika_ray]

It is not the same part, they are a little different, but I am guessing the guy can CNC the much simpler ZKK 602 part as easy as the CZ 550 part. He differently had the slotted nut and screws available. I have what you are looking for somewhere around here, but hesitated mentioning it. I'm not sure I can find it. I had purchased a used stock from Numrich and the metal recoil lug came stuck in the stock, and I had ordered several of the slotted nut and screws from the UK. I'll look for them today. If I find it, it's your. I only have one 602 and it is already complete.

Ray H

 

[teklanika_ray]

It's interesting, the stock recess you have there is for the CZ550 it has a double lug and the 602 looks more like a small piece if 1/4 inch angle iron. I have a 602 stock out in the shop. I'll take a picture and send it. To show you what I am talking about.

 

[Green Chile]

Thanks for the feedback. Interested to see your photos and will send to my guy.

 

[teklanika_ray]

The backwards 7 looking piece is the piece you were inquiring about, but I think looking at your pictures that you are really looking for the lower piece. Which my gunsmith can definitely facilitate.

Stock on the left is a 602, the stock on the right is a CZ 550 (this one has not had an action fitted yet). Notice the single slot on the right, it corresponds withe the little piece of angle iron. The double slot on the left is the CZ 550 and requires the double lug piece.

RayH

 

[Green Chile]

Thanks Ray. I sent my builder a link to this topic so he can see your photos/comments. I will get back to you on that.

 

[teklanika_ray]

The backwards 7 looking piece is the piece you were inquiring about, but I think looking at your pictures that you are really looking for the lower piece. Which my gunsmith can definitely facilitate.

View attachment 678693
Stock on the left is a 602, the stock on the right is a CZ 550 (this one has not had an action fitted yet). Notice the single slot on the right, it corresponds withe the little piece of angle iron. The double slot on the left is the CZ 550 and requires the double lug piece.
View attachment 678694
RayH

Shoot, I got my right and left mixed up in this description, bit I think it's easy enough to sort out based on the pictures.

 

[Hunter4752001]

The 602 part is L shaped whereas the 550 part is an F. The 602 is little more than a piece of angle and would be easy to fabricate and then a little bit of file work to match to the lug on the barrel.

The slot nut and screw maybe the same but I don't know that for sure. An email to AHR or Matrix would confirm as I'm sure they'd have come across the issue before.

 

[teklanika_ray]

Here they are, in the same CZ550 stock.