Wanted Remington 870 Barrel

Labman

AH enthusiast
Joined
Mar 5, 2009
Messages
298
Reaction score
372
Location
Pennsylvania, USA
Media
42
Member of
Lower Providence Rod & Gun Club, Audubon, PA
Hunted
RSA, Zimbabwe, Namibia, Botswana
Looking for a 12 gauge vent rib barrel 26 or 28 inches in length. Improved Cylinder or Modified choke. 26" I/C is my first choice. Must be a Wingmaster blued barrel. Not interested in any Express, Special Purpose or rusty barrels. Must be in decent shape inside and out.

Tom
 

Attachments

  • Screen Shot 2020-03-18 at 9.23.26 AM.png
    Screen Shot 2020-03-18 at 9.23.26 AM.png
    804.1 KB · Views: 96
  • Screen Shot 2020-03-18 at 9.23.27 AM.png
    Screen Shot 2020-03-18 at 9.23.27 AM.png
    968.5 KB · Views: 77
  • Screen Shot 2020-03-18 at 9.23.29 AM.png
    Screen Shot 2020-03-18 at 9.23.29 AM.png
    835.7 KB · Views: 97
Thanks for the tip. I'll check them out.
 

Attachments

  • Screen Shot 2020-03-18 at 9.24.09 AM.png
    Screen Shot 2020-03-18 at 9.24.09 AM.png
    1.3 MB · Views: 79
  • Screen Shot 2020-03-18 at 9.24.10 AM.png
    Screen Shot 2020-03-18 at 9.24.10 AM.png
    1.2 MB · Views: 92
  • Screen Shot 2020-03-18 at 9.24.12 AM.png
    Screen Shot 2020-03-18 at 9.24.12 AM.png
    936.5 KB · Views: 94
Last edited by a moderator:
Thanks for the suggestion but I've already checked gunbroker. Nothing there is what I want. Most of the barrels seem to be Express or some type of matte finish.
 
Here is another site that has barrels.

As for the blueing, you are most likely going to have to have it reblued no matter what you find. That is unless you find one new in a box.

http://www.corsonsbarrels.com/menu.html


.
 

Attachments

  • Screen Shot 2020-03-18 at 9.24.41 AM.png
    Screen Shot 2020-03-18 at 9.24.41 AM.png
    360.6 KB · Views: 89
Last edited by a moderator:
Good for you. From an individual or a commercial location? What length and choke did you wind up with? Mine has a 32" barrel with a full choke, I purchased it in 1968 0r 69.
 
28" modified wingmaster with a vent rib. Purchased from an individual over on another forum. I have an old wingmaster which I bought when I was a teenager back in the early 60's. My first shotgun. It had the old corncob forend and a plain barrel with a polychoke. I picked up a stock from a Rem. 1100, which fits the 870 as well, for $15 at an auction. That got me started on the project to refresh my old 870. Now I just need a forend.
 
Last edited by a moderator:
I took a look at a "newer" 870, what a "POS" by comparison. I also have a Hastings rifled barrel that shoots slugs very well. In close quarters i.e. swamps and dense woods those slugs are devastating on white tails.
 
I agree with you on the Rem. Express being a POS. That however is all you see in gun shops these days. Rem. still makes the Wingmaster but you never see them. Probably due to the price. When people ask me for advice on buying a pump shotgun I always tell them to look for a used Wingmaster instead of a new Express.
 
Labman, Dittos on that!! I have a couple of old Mossberg 500 20 Ga. pumps that I used for my Hunter Education classes. I think that they are better than the new Remington Express.
 

Forum statistics

Threads
59,638
Messages
1,294,999
Members
108,377
Latest member
VickCorm
 

 

 

Latest posts

Latest profile posts

schwerpunkt88 wrote on Robmill70's profile.
Morning Rob, Any feeling for how the 300 H&H shoots? How's the barrel condition?
mrpoindexter wrote on Charlm's profile.
Hello. I see you hunted with Sampie recently. If you don't mind me asking, where did you hunt with him? Zim or SA? And was it with a bow? What did you hunt?

I am possibly going to book with him soon.
Currently doing a load development on a .404 Jeffrey... it's always surprising to load .423 caliber bullets into a .404 caliber rifle. But we love it when we get 400 Gr North Fork SS bullets to 2300 FPS, those should hammer down on buffalo. Next up are the Cutting Edge solids and then Raptors... load 200 rounds of ammo for the customer and on to the next gun!
 
Top