Search results

After a few questions about the sights, I was curious how close they are. 1 shot today at about 25 yards, will need some adjustment if you are interested in shooting open sights

I have only saw bolt rifles made by Clayton Nelson, maybe others could answer ?

8# 2oz with steel Weaver bases

I don't think it has been but have not fired the gun open sights so I do you know for sure

The iron sights have not been touched from the looks of it

Hard to beat the A frames, lots of people like the TSX, they will take some strange paths at time's, plus I don't like scrubbing copper out of my barrel, send the 14 boxes of Barnes down the road and you have plenty for the future.

Very nice rifle, ready to go

Scoped at 100 yards with a Leica 1-6 power

This rifle has shot about 1 MOA with some 300 gr TSX loads traveling at 2500 fps

Very nice Clayton Nelson custom Mauser, fantastic wood, will let pics speak themselves, 8# 2oz with Weaver bases, very trim fast handling gun, 2 pos safety, muzzle diameter .623", 14” LOP $7250 shipped Scope NOT INCLUDED

Leica 1-6, Warne, Talley or Alaskan Arms mounts I would put that combo up against another mentioned in this thread, especially when you consider the money

This is a fantastic deal, this gun is far superior to anything you could buy today at that price point. The FN action is really nice!!

Buzz and Myles are some of the most respected and well established in Zim. I have not personally hunted with them, but many have, it would be tough to find a negative comment against them, book with confidence.

Merry Christmas Mike, great offer

Small sampling of Buffalo, (1st Buffalo) soft through the lungs then 2 CPS through the boiler room in raking shots from the left = dead buffalo. (2nd Buffalo) Northfork FPS, for a poorly placed first shot just above the spine in lowest area of neck, not much blood and 5-6 hours later plus at...

I noticed that also

@Mbalabala Safaris Maybe Lindon Stanton can chime in on this one. C9 has lots of Sable but there are not super long, but thick and plenty to choose from, definitely not a walk in the park for sable there. Never saw one on Mokore Ranch in the Save but one of the trackers claimed he knew where...

I think the ribs are not there for crimping, but for riding the rifling. At any rate I understand what you are saying, seated at 3.6 inches your past the ribs. I just put a light crimp on them there. Seated longer for a CZ mag you can crimp them hard into the ribs, which I have done on all...

I am a fan, in my opinion the best there is, and they are a sponsor of this site with bullets in all sizes readily available. 23 African animals plus one large bull elk this fall so far. The 300 gr SS is a great bullet for the 375. I just tested some in a AHR 375 H&H and got great groups with...

I do not, sorry all gone

sold pending funds thank you all

Very nice shape Leupold VX-II 4-12x40 with Duplex, AO and has coin slots to adjust POI, tracks perfect, has a few light marks which I tried to picture, glass is perfect and very clear, if you need rings and bases I probably have those also for assorted guns, $310 shipped, please message me with...

sold to Green Chile

Green Chile beat you to the punch but I have more and will send you a pm

62 pieces of once fired federal cartridge nickel plated brass, sized and de primed $75 shipped in a USPS flat rate box

Condolences to his family, Rest In Peace and Gods Speed

In the second pic you can see the serial number with the top lever moved over, S72 with means gun was assembled in 1972. Beautiful gun, doubtful if it has salt by the looks of the pics, really clean along the wood to metal edges. Good luck with your sale

Rifle weighs 9.4# in the last pic posted, that would be about 8# with just Weaver steel bases

Pic with the Minox scope I fired a test load with 57.5 gr RL 22 and a 150 gr Swift A Frame, that's pretty good speed, I may try a group with that this evening

I got this rifle out and shot it this evening, had six shells, one to get the 3-15 x 42 Minox on paper, 2 more to get it dialed in, 2 in the bull and one a half inch high Will let this combo go with the scope included, Minox 3-15x42 4a reticle, tracks really well, pretty decent glass, Weaver...

Nebraska bull down, one shot 225 gr SS traveling at 2800 fps did the trick

338 win mag, it’s a nice gun, those 200 gr bullets just didn’t work and I was getting frustrated after the throat was lengthened, but the 225 gr really work, i should probably order some 250’s and see how they work

Northfork 225 gr SS in my custom pre 64 Model 70. The gun has shot other bullets well in the past, but was built with less than zero free bore. Recently had the throat lengthened to accommodate the 225 NF SS bullet. After a sporadic velocity with 200 gr NF SS I fired one 225 gr to test...

Every time a thread on caliber for Buffalo comes up, one should refer to this article. It appears somewhat true that what several PHs have told me, the bigger the gun the client shows up with the more the follow up LOL

Leica makes a 1-6 that is really nice. CameraLand had a demo for $899 not long ago. May not be quite enough for sniping a croc at long range but for the rest of PH duties it is perfect. Alaskan Arms rings are what you need for the Heym, I would consider the lower ones if they clear, with the...

Unfortunately the previous poster who said they wanted the bullets and told me they where mailing a check on May 31 has decided not to finish the transaction so these are still available. Still for sale

They will work but this

I have 200 Barnes .375 300 gr TSX, I would ship them to you for $200

sold pending funds to @jlb1036 thank you

I have 59 of these, will ship to you for $95 priority mail

This is great news, thank you for continuing to produce these great bullets!!

Really nice little 9.3, shoots pretty good with limited load development

This is a great FN actioned gun, could be a candidate for a rebarrel or shoot it as is!!

Yes they are available, I will send you a PM with payment info, thank you sold pending funds to @crossone

141 400 gr A-Frame, top box is full, loaded and shot 9 test loads out of the one of the bottom 2, 24 break away solids, I would sell all for $500 shipped to you, looked at Swift and Midway for pricing but none in stock

I have some Swift A-Frame in 400gr and a box of Break Away Solids to go with