416WSM on Siamese Mauser & 416/348Ackley Improved on Martini

I used 1020 mild steel for the heads with two pin holes to tighten them, and ground a screwdriver bit to suit. The cross shaft is a bit of 7 mm key way stock. I have used 1095 which could be hardened but it was not worth the effort. If you shear off or strip out the threads you are doing it up too tight, they should be firm. The wood will move so you don’t need it too rigid. I rust blued the heads
Gumpy
 
I seem to be having some problems uploading pictures, takes forever and then times out
Gumpy
Are you taking the photos with your phone? Sounds like the images are too large. Can you change the size of photos?
 
I always resize the images to be around 1Mb and have not had any issues uploading them.

Talking stock finishes, I have been given a recipe of Boiled Linseed oil (BLO) and alkanet with Japan Goldsize. But at the moment I cannot source any Japan Goldsize (which is a fast drying varnish).
Instead I have found this product that reads to be similar - does anyone have experience of this product?
Austioneers Promise.JPG
 
I use Linspeed finish. Seem to recall someone posting they could get it in Australia. It has a red dye in the oil I believe. Apply with finger, rubbing it into grain. Let dry about 35 minutes then rub it off with paper towel. Takes several coats to fill the grain.
 
I always resize the images to be around 1Mb and have not had any issues uploading them.

Talking stock finishes, I have been given a recipe of Boiled Linseed oil (BLO) and alkanet with Japan Goldsize. But at the moment I cannot source any Japan Goldsize (which is a fast drying varnish).
Instead I have found this product that reads to be similar - does anyone have experience of this product?
View attachment 638716
I have not used it myself but the bloke who has done a stock for me uses it. The timber comes up quite well. I would put up a photo but IMGUR is playing up on me again.
 
I always resize the images to be around 1Mb and have not had any issues uploading them.

Talking stock finishes, I have been given a recipe of Boiled Linseed oil (BLO) and alkanet with Japan Goldsize. But at the moment I cannot source any Japan Goldsize (which is a fast drying varnish).
Instead I have found this product that reads to be similar - does anyone have experience of this product?
View attachment 638716
I have used the red oil and stock oil on knife handles and found it to work well. I have not used any on a rifle stock though. I just gave what I had left over to a friend who makes rifle stocks, but I dont think he has used any yet.
 
I have not used it myself but the bloke who has done a stock for me uses it. The timber comes up quite well. I would put up a photo but IMGUR is playing up on me again.
You could try postimage.com. Thats all I use for posting photos and it works for me.
 
The No4 303 Sporterised at top of pic has those oils on it.
J5DG0Kg.jpg
 
Last edited by a moderator:
I have used the red oil and stock oil on knife handles and found it to work well. I have not used any on a rifle stock though. I just gave what I had left over to a friend who makes rifle stocks, but I dont think he has used any yet.
I just googled them are they are up for sale and don't look like they are taking on new users.
 
You could try postimage.com. Thats all I use for posting photos and it works for me.
I had the wrong post up from you with my last reply should have been the post referring to postimage.com
 
Have you noticed any darkening or deteriation over time?
No, but I only used a couple of coats of the red oil before I went to the more neutral coloured gun stock oil because I didnt want to overwhelm the relatively light coloured wood (I was using spotted gum in that case). The red oil really brought out the grain on the wood - it was stunning how the first coat of oil transformed the wood.

Any oil finish on a wooden knife handle has similar issues to a wooden rifle stock with regard to durability of the finish. But one of the reasons I use the boiled linseed based product is that they are easy for the owner to refresh the finish over time.
 
As an aside the last few coats of oil on the N05's stock are "Youngs 303" oil. :LOL:

I have had that tin of Youngs for nearly as long as I have had the rifle.
 
Thank you both Rifletuner & Rule 303 for your feedback - I have now ordered the Red Oil and Stock Finisher.
I only used a couple of coats of the red oil before I went to the more neutral coloured gun stock oil because I didnt want to overwhelm the relatively light coloured wood
I will be doing he same.
 

Forum statistics

Threads
57,424
Messages
1,230,179
Members
100,943
Latest member
DerrickMcM
 

 

 

Latest posts

Latest profile posts

LIMPOPO NORTH SAFARIS wrote on RStien321's profile.
Dear RStien321

I noticed your thread this morning.

We would be thrilled to assit you as mentioned in my comment on your thread.

We as Limpopo North Safaris has numerous areas in limpopo that vary between 10 000 to 24 000 acres that we hunt that has all of the animals on your wish list furthermore we have great deal on cull buffalo cows and bulls.

Please let me know if you might be intrested.

Regards
Sampie
John Kirk wrote on Macduff's profile.
Great transaction on some 375 HH ammo super fast shipping great communication
akriet wrote on Tom Leoni's profile.
Hello Tom: I saw your post about having 11 Iphisi's for sale. I have been thinking about one. I am also located in Virginia. Do you have photos of the availables to share? My email is [redacted]

Thanks and regards,

Andy
Natural Bridge, Virginia
 
Top