BRNO 602 Synthetic Stock - What options do I have?

[deewayne2003]

So I’ve got a BRNO 602 in .375 that I’m going going to replace the stock with Sythetic one.

McMillan says the CZ550 stock will work but it is available in flat top only so I would have to find someone to inlet it.

Are their any other quality options out there?

 

[Hooked Now]

Bell and Carlson has an option that dropped right in for the 550. Shoots nice. It's not a McMillan, but it works well. I'm assuming what works for the CZ 550 would also work on your 602 but a quick call to B&C would confirm.

 

[deewayne2003]

I’ve sent them an email.

the big difference is that the BRNO has the trigger assembly mounted to the floor plate/bottom metal.

The rifles are close but not exactly the same.

 

[Pondoro]

My .416 Rigby 602, McMillan

 

[Luvthunt]

View attachment 678412

My .416 Rigby 602, McMillan

Pondoro
What make peep sight is on your 416?

 

[MLindsay]

I have a Bell and Carlson on my 500 A2 602. The gunsmith had a small amount of modifying to fit

 

[Jack Stevens]

So I’ve got a BRNO 602 in .375 that I’m going going to replace the stock with Sythetic one.

McMillan says the CZ550 stock will work but it is available in flat top only so I would have to find someone to inlet it.
Are there any other quality options out there?

Years ago I bought a McMillan synthetic CZ 550 stock for my BRNO 602. The plan was to restock it for an AK trip. My gunsmith had to spend a lot of time getting it to fit, so the McMillan 550 is definitely not a ‘drop-in’ for a BRNO 602.

Just what I know.

 

[Pondoro]

Pondoro
What make peep sight is on your 416?

Its a one off..by a toolmaker..

 

[Jack Stevens]

Pondoro
What make peep sight is on your 416?

Just FYI, Sinner Sights makes a rear "peep" unit for the 550 action. It does require D&T--ing the rear receiver bridge.

Then there's the second issue of probably needing to swap out the front-sight blade for, usually, a taller one. But that takes some experimenting at the range with your load of choice and at what distance you want the sights zeroed for.

However, once your rear peep and front sight are regulated and zeroed, it's a quick and accurate sighting system.