Do you lap your scope rings?

[Russ16]

Putting new scopes on a coupe rifle and trying to decide if I should lap the scope rings. I've done it both ways and I haven't really seen a difference. So crowdsourcing a little to here to see if it is worth the time. Do you lap your scope rings?

 

[Gemsbok45]

No need!

 

[Pilgrim]

Nope. I'm not a good enough shot for that to ever make a difference.

 

[Dirtdart]

I put use a lapping bar to check and for ring alignment. If there is any mis alignment I want to correct it as to not have "torque" on the scope tube.

 

[mdwest]

depends on the gun...

on my hunting rifles? no... I use high quality, precision made rings, and the distances Im shooting and the ammo Im using, the difference that lapping might make would be immaterial..

on my precision, long distance guns? yes.. but thats a completely different ball game..

 

[Ontario Hunter]

I have one-piece bases on both rifles. Lapping is not necessary with that style base if rings are both same brand/type.

 

[wesheltonj]

No.

 

[Boyd Brooks]

Never lapped rings, never been any problems, 1” or 30mil.

 

[skydiver386]

Depends on the quality of the rings and bases, and the recoil generated by the specific firearm. Almost every one piece base system seems to be very well aligned, but some need a lot of material removed before I'd consider torquing it to spec.

Anything above .375 I think should at least have the alignment checked by clamping a lapping bar and lapping lightly. If no bright spots appear, stop and consider it good.

This is one area where price seems to buy quality.

 

[Wyatt Smith]

I’ve never lapped, but can see its merit in correcting out of line rings.

 

[baxterb]

No. Most of my bases are custom for the rifle and with Talleys they are good to go. i did have a guy try to correct his horrid work by lapping Talleys once and did nothing more than ruin the rings and send me to a guy who knew what he was doing. Anyone want to buy a set of ruined Talleys?