Help-African European Skull Mount

[Sabre]

They actually had the tags attached to the skull so not sure why they drilled the holes in the horns. It’s very depressing. They want our money but don’t seem to take care of them. That’s why i brought everything home to do the taxidermy work.

There’s no holes in the back of the hartebeest or wildebeest. The wildebeest still has some hair and stuff on the base as well.

What people don't see many times, is that when your animal goes back to the skinning shed, it often has a hole drilled in each horn which then gets a tag attached, then a tag attached to the skull, Also possibly a tag attached to the hide, and a tag attached to the back skin (if you choose to keep it).

As @buck wild said, they are dealing with a fairly insane number of animal parts and people get pretty mad if even one part is wrong. So, they do this to keep all the parts labeled until shipping.

It is a fairly unfortunate reality, but horns, hides, and skulls routinely come back in pretty rough condition. Some places coat the horns with an oil based insecticide that makes them very black. Some places have had instances of painting the horns all black. Some paint the skulls white to cover bad whitening process. As someone else mentioned, sometimes they come back with a bunch of teeth missing, or broken noses.

It can sometimes not be the amazing feeling you were hoping for when you open the crate and the horns you saw on the animals in Africa don't end up looking nearly as good by the time they hit America. To some degree, I just try to accept that, within reason, it isn't something we can completely control.

 

[Huntforever]

Linseed oil may make the horns look "richer" like it does for wood but doesn't darken a whole lot. To "treat" horns we use paste wax.

I hear people also use mop and glow

 

[Huntforever]

What people don't see many times, is that when your animal goes back to the skinning shed, it often has a hole drilled in each horn which then gets a tag attached, then a tag attached to the skull, Also possibly a tag attached to the hide, and a tag attached to the back skin (if you choose to keep it).

As @buck wild said, they are dealing with a fairly insane number of animal parts and people get pretty mad if even one part is wrong. So, they do this to keep all the parts labeled until shipping.

It is a fairly unfortunate reality, but horns, hides, and skulls routinely come back in pretty rough condition. Some places coat the horns with an oil based insecticide that makes them very black. Some places have had instances of painting the horns all black. Some paint the skulls white to cover bad whitening process. As someone else mentioned, sometimes they come back with a bunch of teeth missing, or broken noses.

It can sometimes not be the amazing feeling you were hoping for when you open the crate and the horns you saw on the animals in Africa don't end up looking nearly as good by the time they hit America. To some degree, I just try to accept that, within reason, it isn't something we can completely control.

I can see what your saying but there has to be a better way then drilling holes in the horns. Worst case don’t drill at the top facing outward..

 

[Sabre]

#4- I do wonder what the average guy does to "seal off" the horns from the cores? I personally am more concerned with bugs getting in between my horns and cores later down the road. Completely sealing them off would prevent that as an issue.

Same here, I think the larger problem is bugs getting in there later and finding it as a food source. I think the answer to your question is nothing. I think the average guy does nothing to seal them off. And what's funny is that they may never have a problem. And someone who tries very hard to avoid the future problem might still have problems.

One thing I have seen some people do and I am considering on a couple I am working on now is to use silicone to attach. And then in that way you could certainly get 360 coverage and sealed. However, I have some doubts about it keeping bugs out long term as they might be more able to get through silicone vs, something more solid. But plenty of holes in exterior houses are sealed up this way and keep bugs out.

Also thinking that if a person did the silicone and then pushed a ring of epoxy in under the bottom edge of the horn to "seal it", that's about as much as a person could possibly do. I'm sure many would call that extreme, but if you can prevent a problem before it starts with fairly minimal effort, why not give it a shot.

 

[Sabre]

I can see what your saying but there has to be a better way then drilling holes in the horns. Worst case don’t drill at the top facing outward..

I'm not disagreeing with you. And I also wish they would figure out a way that didn't damage the horns that all African places could get on board with. All of mine have been drilled through the top on the side.

I can give you a likely reason they drill at the top/tip of the horn. If you ever see a horn sheath removed from the horn core; There is essentially thick bone most the way up inside that horn sheath. However, towards the tip, the last bit of horn sheath is filled mostly with what looks like a gelatinous noodle when you removed the horn sheath.

So, if they drill through that area right after you harvest the animal and place their tag with steel wire, they can still remove the horn sheath from the horn core. If they drilled lower they would have to go through thicker bone and also the steel wire through the bone would make horn sheath removal more annoying later.

 

[buck wild]

I hear people also use mop and glow

Have you "heard" that from others, other than me (on another thread here on AH recently) ? Just wondering, as I got the info from an old school taxidermist in the early 90's. Not sure I have heard of many others specifically talk about Mop N Glo. I have been espousing its greatest on here though, especially for the smaller horned animals. . I know White Bone uses it on his euro skulls in his YT videos also.

 

[buck wild]

Same here, I think the larger problem is bugs getting in there later and finding it as a food source. I think the answer to your question is nothing. I think the average guy does nothing to seal them off. And what's funny is that they may never have a problem. And someone who tries very hard to avoid the future problem might still have problems.

One thing I have seen some people do and I am considering on a couple I am working on now is to use silicone to attach. And then in that way you could certainly get 360 coverage and sealed. However, I have some doubts about it keeping bugs out long term as they might be more able to get through silicone vs, something more solid. But plenty of holes in exterior houses are sealed up this way and keep bugs out.

Also thinking that if a person did the silicone and then pushed a ring of epoxy in under the bottom edge of the horn to "seal it", that's about as much as a person could possibly do. I'm sure many would call that extreme, but if you can prevent a problem before it starts with fairly minimal effort, why not give it a shot.

Silicone is an interesting thought. Not sure I'd use it in a taxidermy application but for the DIY at home, easily accessible material for sure. But as you surmise, it might still take something else to completely seal off the opening, but maybe not. Gotta be better than nothing.

 

[Ontario Hunter]

Not really worried about bugs getting underneath the horns. The first botched stinky shipment from 2019 was a pain to clean up and only the kudu and gemsbuck had detached horns. Haven't been any bugs in them. Or the second shipment two years later. That taxidermy outfit used the holes in the back of horns treatment for horns that were not removed. For third shipment Hunters & Collectors removed all horns and trimmed back the skull stumps. Then the question was how to reattach horns. I tried hot glue so they could be detached for moving etc but the glue didn't stick reliably. So I opted to drill small holes at the base of horns on back side. Then put horns on stumps and mark spots through the holes. I used an appropriate size bit to drill holes into stumps at the mark. Then I simply used very small screws to attach horns to stumps. Can't see the screws because they are hidden on back side close to the skulls. I did use epoxy to attach springbuck skulls because they are small and would be easy to transport whole. Also screw heads would likely be more visible. It sounds clunky but worked well. Look at the above image of red lechwe. Even from the side screws are not visible. And the horns are attached securely! Here's the kudu from that shipment. Screws also not visible. If I ever have to relocate (senior's center?) or want to put trophies in storage, it will be easy to detach horns and box everything up.