375 Ruger Fan
AH ambassador
- Joined
- Jun 14, 2015
- Messages
- 7,370
- Reaction score
- 19,065
- Location
- Shreveport, Louisiana
- Media
- 268
- Articles
- 5
- Member of
- NRA, DSC
- Hunted
- Nam, Zam, Zim,RSA (Eastern Cape & NW), Canada, NZ, Alaska, TX, LA, MO, OH, MT, ID, WA, WY
Start without the FCD in the press.
Handle goes all the way down (assume yes at this point)
Screw in FCD until it comes in contact with the shell holder (the shell holder is on, correct??)
Lower the ram by raising the handle a small amount. Screw the FCD in one half turn.
Raise the ram so that the shell holder comes in contact with the FCD. Tighten the lock ring.
Without a cartridge, does the ram cycle and the arm go all the way down?
Handle goes all the way down (assume yes at this point)
Screw in FCD until it comes in contact with the shell holder (the shell holder is on, correct??)
Lower the ram by raising the handle a small amount. Screw the FCD in one half turn.
Raise the ram so that the shell holder comes in contact with the FCD. Tighten the lock ring.
Without a cartridge, does the ram cycle and the arm go all the way down?