Magnaport, anyone?

[BJH65]

Not a rifle, but a .475 Linebaugh revolver. I won a gift certificate for a Magnaport job and although I could handle the recoil of the .475, decided to have the single port (one each side) added to the .475. Muzzle jump is definitely reduced (kind of regret not getting the double port). As far as noise, I haven’t noticed much, if any increased blast as the gasses are directed upward.
Magnaport is a class operation and the people were great to deal with. The late Larry Kelly started the company, and I’ve spoken several times with Larry’s son, Ken, who operates it with the same passion as his father.

Just sold my Freedom Arms 475 Linebaugh with 6 inch barrel, a very high quality revolver btw. I believe Freedom Arms are the finest SA factory revolvers made and a great company to boot. One can order the Freedom Arms with Mag-na-porting as well and I can understand why since my 475 Linebaugh was a painful revolver to shoot! It is an excellent enhancement to their line of revolvers chambered in 454 Casull, 475 Linebaugh and 500 Linebaugh.

 

[Papa72]

View attachment 658553
Here is my custom Robar/AHR Brno 458 Lott that Jack Lott himself originally put together for an editor of Petersen’s hunting many years ago, purchased from AH member Luvthunt. It does have a detachable muzzle brake in addition to the Mag-na-port but I keep the thread protected screwed in lieu of the muzzle brake. While recoil is “brisk” with this 9.5 lb rifle, It feels no worse than my CZ 416 Rigby.

I love that the muzzle rise is greatly reduced. I see this as a great benefit while I imagine recoil is only minimally reduced with just the 2 ported slots. You’ll have more felt recoil reduction on your 416 with the traditional 4 Mag-na-port slots, All of my practice is shooting off tripod sticks and I always wear my PAST recoil pad on my shoulder. Luvthunt mentioned this and I agree, this is really a perfect setup for a PH! Whether there is a reduction in value due to the Mag-na-porting, I don’t care, this rifle is to be used on DG game and I see it as a benefit.

According to their website, I am limited to 2 slots due to the banded front sight on this rifle.

 

[BJH65]

According to their website, I am limited to 2 slots due to the banded front sight on this rifle.

Hmmm…I would give them a call, maybe email them a photo of the muzzle and front sight of your rifle. I have seen Mag-na-ported 4 slots on banded barrels like in the attached photo. I’m not quite sure how effective the recoil reduction is with just the 2 slots? Wouldn’t hurt to contact them and hear what they say, they seem like nice folks.

 

[Sarg]

I’m amazed at all the anti commends against the Magnporting & mostly from folks who haven’t even shot a rifle so adorned & some who might not even know what it is ?

We had racks of lightweight custom Mauser 98’s in .458Win in Brown Precision stocks, Magnported all, they were Ok to use even at 8lb to 8.5lbs.

I hate breaks or porting of any type other than Magnport, on a cheaper custom/work type rifle it won’t effect the value but will increase your enjoyment & usage.

I did see a very nice A&N Webley actioned 450NE Magnported & I'm very sure that it’s value was negatively impacted !

 

[BJH65]

I’m amazed at all the anti commends against the Magnporting & mostly from folks who haven’t even shot a rifle so adorned & some who might not even know what it is ?

We had racks of lightweight custom Mauser 98’s in .458Win in Brown Precision stocks, Magnported all.

I hate breaks or porting of any type other than Magnport, on a cheaper custom/work type rifle it won’t effect the value but will increase you enjoyment & usage.

I did see a very nice A&N Webley actioned 450NE Magnported & I'm very sure that it’s value was negatively impacted !

Thank you, agreed!

 

[RR 314]

Well, at least 50%. I looked at this fine rifle probably 25 times online as it lingered at MNR. It would have sold for 2x without the porting. I know this is accurate because I would’ve bought it for 2X. I have a couple friends that would’ve done the same.

On fine rifles, you greatly limit your buyer pool/value. Then again, if you are not bothered by the work (or actually even better—like the work), like in this instance, you can pick up a great rifle and an absolute bargain. Well done by Buckstix!

http://

Beautiful and practical piece! I dare say the value of this rifle has not been reduced by 2/3 as was previously mentioned on this thread. I see it as an enhancement!

 

[BJH65]

Well, at least 50%. I looked at this fine rifle probably 25 times online as it lingered at MNR. It would have sold for 2x without the porting. I know this is accurate because I would’ve bought it for 2X. I have a couple friends that would’ve done the same.

On fine rifles, you greatly limit your buyer pool/value. Then again, if you are not bothered by the work (or actually even better—like the work), like in this instance, you can pick up a great rifle and an absolute bargain. Well done by Buckstix!

It is true, some see Mag-na-porting as a defacement to a rifle while I see it as an enhancement. Aesthetically though it’s hardly noticeable and the additional noise/muzzle blast is hardly more discernible than a non Mag-na-ported rifle (I’ve done several side by side shooting comparisons of both) so I’m simply at loss on the negative sentiments towards Mag-na-porting while I am more sympathetic to the anti muzzle brake crowd but I make an exception with Mag-na-port.

 

[RR 314]

It is true, some see Mag-na-porting as a defacement to a rifle while I see it as an enhancement. Aesthetically though it’s hardly noticeable and the additional noise/muzzle blast is hardly more discernible than a non Mag-na-ported rifle (I’ve done several side by side shooting comparisons of both) so I’m simply at loss on the negative sentiments towards Mag-na-porting while I am more sympathetic to the anti muzzle brake crowd but I make an exception with Mag-na-port.

It is just the way it is. No sense trying to figure out why, just embrace the fact that you are in the very limited minority of dangerous game rifle owners that likes the magnaporting (on otherwise bespoke quality). Seriously, it opens up some very fine rifles at greatly reduced pricing.

 

[BJH65]

It is just the way it is. No sense trying to figure out why, just embrace the fact that you are in the very limited minority of dangerous game rifle owners that likes the magnaporting (on otherwise bespoke quality). Seriously, it opens up some very fine rifles at greatly reduced pricing.

Very true, I was able to obtain a very nice custom Brno 458 Lott on AH with Mag-na-porting that I believe didn’t sell for this sole reason, that I otherwise may not have purchased so I am very grateful. As an aside, I’ve never seen Rigby, Holland & Holland or Westley Richards bolt action rifles with Mag-na-porting!

 

[Papa72]

I would not port a rifle of that quality either. I don’t think I would pass on any rifle that I could afford that was ported, but that affliction ain’t struck me recent. This .416 Ruger is a project rifle and a perfect before/after test bed but weather has me stalled from the range presently.

 

[Papa72]

Hmmm…I would give them a call, maybe email them a photo of the muzzle and front sight of your rifle. I have seen Mag-na-ported 4 slots on banded barrels like in the attached photo. I’m not quite sure how effective the recoil reduction is with just the 2 slots? Wouldn’t hurt to contact them and hear what they say, they seem like nice folks.
View attachment 658607

That is the exact NECG Masterpiece banded sight I installed on my rifle so at least porting is possible. I’ll call them.