Mauser Scope Mounts

[cmonsalve17]

Good morning everyone,

I am planning on buying and old Mauser 98 Action, specially a spanish model, "La Coruña", but I'm have some doubts first on how I'll be able to mount a scope on it.

The fore "bridge" of the action, where usually is mounted the scope fore base, has a symbol from the gunsmith factory, which I wouldn't like to damage or even cover if possible.

Does anyone know how could I solve this problem? Has anyone faced this situation before?

I attach some pictures of the rifle and the symbol i refer to.

Thank you very much,

Carlos Monsalve

 

[Sika98k]

You could fit on a side mount. This is screwed onto the left hand side of the action. Anecdotally I have heard that you should use the long side mount other than the short side mount.
Google Mauser 98 side mount. I believe I have seen them on eBay and eGun.de

 

[KJE81]

I have seen a lot of old customized mausers made by european gun smiths, these often has the forward scope base on the barrel just in front of the bridge. So its definately doable but probably quite expansive as these all were german hook mounts and probably has to be manually shaped after the barrel and then welded on. Like on this custom mauser in 9,3x62:

 

[grand veneur]

The front mount must be fixed to the barrel, just as you do for longer scopes.

FN Mauser caliber 340 Weatherby Magnum.

 

[grand veneur]

Something like this is done at the same time as a rifle is built and by an experienced gunmaker. Doing it later is difficult because a lot of things have to be changed on the rifle and his stock.