New Pig and Coyote Solution

[mark-hunter]

Wouldn't the most elegant solution be something like German pivot mounts, one set for a day scope and one for a dedicated thermal scope?

This is general description of what I use (except I dont have thermal but NV, which suits the purpose).
For me it is QD on picatinny rail, with Rusan QD rings.

My feeling is, that picatinny system for modern sighting solutions and electronics is most convenient, I prefer not to mix thermal, or NV with classic designs of swing mount, or claw mount.

 

[Daisy]

Man I’m glad you got that working for you. I tried clip ons and just never liked them as much as my dedicated thermals.

Agree on 5.56 for hogs. They die but run. I use 6.5 or 30/06 when I’m ridding the world of hogs.

 

[mark-hunter]

@Daisy
You speak pure wisdom on calibers! Pure wisdom!

 

[mdwest]

Red - A suppressor cover goes a long way to reduce visual heat from the can for rapid follow up engagements. Usually that first shot lights it up like a torch and it’s difficult to see the second target, no matter the thermal platform.

Especially true in my situation.. Im shooting "K" cans on both of my guns.. they don't get anywhere close to "Hollywood" quiet.. but they knock enough of the recoil off to get the guns back on target quickly (when they are running properly).. and bring the noise down to at least being reasonable when shooting from inside a blind, etc...

but they get hot quickly..

slipping a quality cover over them brings down the heat signature extremely well.. and also makes it a lot easier to handle the can after a range session, etc (not sitting around waiting for a long time for it to cool before I can remove it, put the rifle back into the case, etc..)..

 

[Daisy]

@Daisy
You speak pure wisdom on calibers! Pure wisdom!

Haha. Experience on that one. I’ve killed a ton of varmints. A ton. If it’s a few hogs my 5.56 does fine, I neck or ear shoot them. For a big sounder when chaos breaks out the 5.56 is lacking.

Lately I’ve been using subsonic some. It’s fun to try new things.

My coyote load this year will be a 62ge eld-vt running 3500 from a 22 creedmoor. Yote medicine.

 

[Daisy]

Especially true in my situation.. Im shooting "K" cans on both of my guns.. they don't get anywhere close to "Hollywood" quiet.. but they knock enough of the recoil off to get the guns back on target quickly (when they are running properly).. and bring the noise down to at least being reasonable when shooting from inside a blind, etc...

but they get hot quickly..

slipping a quality cover over them brings down the heat signature extremely well.. and also makes it a lot easier to handle the can after a range session, etc (not sitting around waiting for a long time for it to cool before I can remove it, put the rifle back into the case, etc..)..

I’ve switched to silicone wraps. I then use self healing silicone tape and coban/vet wrap around the ends. Best mirage decreasing thing I have found.

 

[TOBY458]

I looked at the Leica clip on thermal at DSC this year. Very impressive! It’s what I’ll be buying when I finally pull the trigger on a thermal unit.