Real world results and experiences with Swift Break-Away solid ?

roklok

AH veteran
Joined
Dec 12, 2023
Messages
103
Reaction score
337
Media
10
Hunting reports
Africa
1
USA/Canada
1
I bought two boxes of 300 grain Break-Away solids to develop a load for my .375 H&H. I have searched, but it seems there is not a whole lot of data out there yet on these solids from actual use. They look like a great option, definitely pricy, but I would be interested in hearing more about how these are actually performing in the field. I have been using the CEB Safari Solids but am experiencing bullet setback in the magazine under recoil. If I seat the CEB solid out to crimp between first two driving bands to eliminate setback, the OAL is too long for my magazine. Thinking the Swift solid will eliminate this issue and pair well with the A-Frames in this rifle.
 
The Swift Break Away solid is a damn fine specimen of what a good FMJ solid should be like. As an added bonus, they are perfectly safe to employ in all vintage double rifles (that are within proof, of course).

The only downside to them, is that Swift never seems to have them in stock ! Yes, a dear friend of mine uses them on elephant and hippopotamus on land quite extensively. If you would like any load data, I would be more than happy to get you in touch with him. He just returned from a tuskless cow elephant hunt recently.
 
Thanks ! I did a fair bit of searching and wasn't coming up with much on the way of field reports. Probably a factor of their relative newness and high price, as well as limited availability has limited information on these. I will use them with confidence !
 
Hi Roklok.400 gr @ 2400 fps from. 416 remmag - elephant cow frontal brain
20240623_203107.jpg
 
I don't have a bullet pic, but after a hard hit with a 416/400 cal A-Frame from my M-70 in 416 Rem, the buffalo kept moving. A 400 grain Swift Break Away solid that entered just in front of his right ham and went toward the opposite shoulder stopped him from moving. The solid didn't exit, the stomach caught it. Then again, buffalo stomachs are know as bullet catchers, even king-of-penetration 416/400 grainers.
 
I used a 300 gr. .375 break away solid to put a follow up shot into a wounded eland. Shot was from the rear, through the rumen into the vitals. Deep penetration, almost no bullet distortion, good wound effect. Perfect! I wrote a report with pictures in bullet performance database.
 
Thanks guys ! Just what I was looking for. I wish Swift would put a cannelure for crimping on these, but I doubt they will have the same problem the CEB bullets did. With the minimal contact with case neck because of the driving bands, the CEB solids were getting driven into the case by recoil. I will shortly do some testing of this, putting a solid in magazine and firing a half dozen rounds or so.
 

Forum statistics

Threads
57,908
Messages
1,242,721
Members
102,300
Latest member
joe laws
 

 

 

Latest posts

Latest profile posts

Grz63 wrote on Werty's profile.
(cont'd)
Rockies museum,
CM Russel museum and lewis and Clark interpretative center
Horseback riding in Summer star ranch
Charlo bison range and Garnet ghost town
Flathead lake, road to the sun and hiking in Glacier NP
and back to SLC (via Ogden and Logan)
Grz63 wrote on Werty's profile.
Good Morning,
I plan to visit MT next Sept.
May I ask you to give me your comments; do I forget something ? are my choices worthy ? Thank you in advance
Philippe (France)

Start in Billings, Then visit little big horn battlefield,
MT grizzly encounter,
a hot springs (do you have good spots ?)
Looking to buy a 375 H&H or .416 Rem Mag if anyone has anything they want to let go of
Erling Søvik wrote on dankykang's profile.
Nice Z, 1975 ?
Tintin wrote on JNevada's profile.
Hi Jay,

Hope you're well.

I'm headed your way in January.

Attending SHOT Show has been a long time bucket list item for me.

Finally made it happen and I'm headed to Vegas.

I know you're some distance from Vegas - but would be keen to catch up if it works out.

Have a good one.

Mark
 
Top