416 WSM first range trip

[Downandlow]

None yet, but I’ve maxed out those powders and am happy with the Speer loads. Have to see what else I can try for the 350gr TTSX. Wanna hit 2250fps. Availability limited here. I even tried H4350 as I have lots on hand but only got 1750fps slightly compressed load.

Maxed out case volume? I’m going to start building my 416 loads and curious on which powders to try. I have some 4895 and hate buying powder at these prices only to find they aren’t suitable. My barrel length is 20” and I beleive yours is 22”?

 

[Don416]

Barrel is just under 20”. With Speer 350 I could squeak a little more 4895 in the case but 3031 is maxed. Most on the site are using Accurate 2520 but I haven’t been able to get any.
I’m happy w/the Speer bullets, just want to juice up the Barnes 350gr TTSX a little more.
Think I can get some BL-C2 and try it.
Good luck.

 

[Downandlow]

My other thoughts on powders is to find the most temp stable as this rifle will likely be in Africa after Buffalo and Alaska for bears. Anyone tried 8208XBR?

 

[BlueFlyer]

My other thoughts on powders is to find the most temp stable as this rifle will likely be in Africa after Buffalo and Alaska for bears.

Hodgdon's H4895 is manufactured in Australia and is sold here as AR2206H. It is specified as being temperature stabilised. I easily get 2400fps with 350Speer hotcores with a 21" barrel.

 

[Downandlow]

What kinda charge did u use to get there

 

[BlueFlyer]

What kinda charge did u use to get there

With 350gn Speer hotcore 70gn of AR2206H gave 2417fps
With 400gn Hornady 67gn of AR2206H gave 2251fps
Neither load had pressure signs.

 

[Don416]

Fired some cartridges with Barnes 350gr TTSX, Winchester 748 powder today, 62, 63, 64gr slightly compressed.
No time for Chrony info, just checked for pressure signs, all ok, shot great.

 

[dlmac]

The 416 ruger is a good round and would work as the big brother to your 35/375.

I am thinking the 416 WSM would be a fantastic AK bear round.

How would it compare to the 416/348? case capcity etc

 

[Ozishooter]

I clearly have the winter blues... I have a donor rifle in my shop, and your project got me thinking that a .375 WSM would be cool too... particularly because I have lots of brass and bullets... before I finished my coffee, and cleared my head, I had the reamer, dies and barrel on the way! I need this like a hole in the head, but WTH, life is too short to be boring.

Hi
I just loaded some 375WSM 270gr barnes with ADI 2208 for 2590FPS

 

[hoytcanon]

Hi
I just loaded some 375WSM 270gr barnes with ADI 2208 for 2590FPS

I just got back from Namibia, took ten animals with the .375 WSM with 235 TSX FB and 72.0 grains of CFE-223 @ 2875 fps.

 

[Don416]

With 350gn Speer hotcore 70gn of AR2206H gave 2417fps

With 400gn Hornady 67gn of AR2206H gave 2251fps
Neither load had pressure signs.

Also tried some 416WSM 400 gr Hornady RN with 57gr IMR3031 with some room for more, again no chrony but no pressure signs. Whacking 10” gong at 100yds no problem.

 

[AZDAVE]

@dlmac the 416/348 will have more case capacity, based on the parent cartridge. Either the 416WSM, 416B&M, or the 416/348 will be a hammer on most anything you want to shoot. all will exceed the 450/400 ballistics with 350 or 400 gr bullets.

I am very pleased with my 416WSM.

 

[dlmac]

@dlmac the 416/348 will have more case capacity, based on the parent cartridge. Either the 416WSM, 416B&M, or the 416/348 will be a hammer on most anything you want to shoot. all will exceed the 450/400 ballistics with 350 or 400 gr bullets.

I am very pleased with my 416WSM.

Thank you for the information and reply. I have a couple of siamese actions and was think of the 416/348 or the 400 Fuller project. The 416 WSM might be something to watch. I have a 416 taylor and 450/400.

 

[Don416]

Thank you for the information and reply. I have a couple of siamese actions and was think of the 416/348 or the 400 Fuller project. The 416 WSM might be something to watch. I have a 416 taylor and 450/400.

I think the Taylor is a better choice after doing the 416WSM but don’t regret it. 458Win mag cases should be easy to get and form to Taylors and there is lots of published data.

 

[BlueFlyer]

I have a couple of siamese actions and was think of the 416/348 or the 400 Fuller project.

If you are going to build on a Siamese Mauser action, then the 416WSM is the best choice due to the cartridge length of 2.950" and the Taylor @ 3.340.
If you are going down the 416/348W cartridge then you need to open the bolt face unless it has previously been modified for 45/70.

For a virgin Siamese Mauser I would go with 416WSM as it is the easiest conversion. Or any of the WSM family would be possible.