Here are the guys that I use.
Hunters HD Gold - Safety Protective Eyewear, Available in Rx, Lenses Made in USA!
Hunters HD Gold - Safety Protective Eyewear, Available in Rx, Lenses Made in USA!
I had a rifle with buck horn sight. I used a deemed tool to cut the horns off then ground the sides into a shallow V. Now I can see the animal and it works much better especially on moving shots.I have an old Winchester lever gun that has buckhorn style sights that I didn't want to mess with so I took a bright white flat paint for the front sight and put a bright red pen point dot at the base of the center of the back sight and my eyes pick it up well while focusing on the front sight. I just sprayed a Q-tip and for the front and then a tooth pick on the back. Made low light much better too and if you don't like it or the color combo a Q-tip, thinner and 15 seconds and it's gone.
I was blessed with very good eyesight up until my mid 50’s. Glasses didn’t really fix the problem and I was just about at the stage of giving up on iron sights.After cataract surgery in both eyes, I can see either what I'm shooting at or the sights but not both. Doktor Optic fixed the problem.
How does that help?Move the rear sight forward.
Have the front sight replaced with a fiber optic. I am in the same boat as are most 50 year olds needing reading glasses. My eye doc gave me some eye drops that can alleviate reading distance problems for a few hours. Maybe I’ll try that.After some help please.
As age progresses, my eyes can't accommodate as well as they used to and, as such, I'm finding the contrast levels between the fore and rear sight on my double an increasing problem. I'm not keen on either a scope or a reflex but was wondering what the older gents (of which I'm sure there are possibly a couple) might do to get around this.
My Fabarm double has fantastic open sights that use a clever fibre optic trick to enhance the the sight beads to make them almost glow. The foresight is yellow and the rear sight red and this makes alignment and targeting really easy. My Chapuis on the other hand - and this is the one causing the problem - has proper old school sights with a shallow V blued rear leaf and a tiny white dot foresight. I won't deny, I'm struggling with this. I wear glasses to read and my distance vision is fine but its the distance between the sight points that causing an issue. If it were an option, I'd probably fit the Fabarm sights, but, as you can imagine, Chapuis weren't wonderfully helpful with that suggestion and surprisingly short on alternatives.
Before I get out my paintbrush and slap on some luminous paint, I was wondering whether there were any wonderfully innovative suggestions as I really don't want to walk the scope path.
Thanks in advance
FN
How does that help?