Wanted A Square Rifle

[krish]

View attachment 516742View attachment 516743 416 Rigby fancy Hannibal

Why was the Name Hannibal Model rubbed off.
Krish

 

[C.W. Richter]

lol ? it is weird (perhaps the great conqueror against Rome's name clashes with Taylor?) My Hannibal doesn't say Hannibal on it and the mfr/caliber inscriptions are quite light/shallow. The receiver serial no. is quite clear. I believe the SS bbl coating filled in the lettering somewhat on some models.

 

[Happy Myles]

I have a 460 Short A Square Art sold me long ago. It is extremely accurate and I own and use several different heavy bullet rifles. Have taken elephant and buffalo with it and on a bet dropped a jackal at 300 yards. A lucky hold by me and the rifle backed me up

 

[Flewis]

He also used sako actions early on. Another way to tell is the bedding.

 

[TTundra]

Why was the Name Hannibal Model rubbed off.
Krish

Early rifles did not have the "hannibal" script on the left side if the receiver. These being 1990s would likely not have them even though customized. I would like to know if anyone has a KY Hannibal with the "A Square, Made in USA" barrel marking with "Hannibal" on the receiver or if that was a later Wyoming addition.

 

[Flewis]

I had a ky a2 that I drove to ky in 89 and ordered. As I recall it had no markings at all.

 

[Jefferry404]

I ordered my 416 Rigby from Asquare in 1985 as only 416 factory available at the time.
It has vague receiver stamps on the left side, RE on the top, bolt is stamped with number and only other markings are on the barrel. Serial # indicates receiver made in 1918.

Steve

 

[Bob Nelson 35Whelen]

I ordered my 416 Rigby from Asquare in 1985 as only 416 factory available at the time.
It has vague receiver stamps on the left side, RE on the top, bolt is stamped with number and only other markings are on the barrel. Serial # indicates receiver made in 1918.
View attachment 589029

View attachment 589030

View attachment 589031

Steve

@Jefferry404
Stamped 1918 and with that safety definitely made on a M17 Enfield action.
Bob

 

[JPmbogo]

Art Alphin is apparently alive and well and residing in Bozeman, MT. He has an active website. Has anyone tried to contact him?

 

[Jefferry404]

Read thru his web site sometime ago. He spends his time as a trial forensics expert and he clocks by the minute!
Not a big fan of his stock design and he charged me quite a bit for a military Enfield actioned rifle but on the other hand, was able to ordered barrel contour, sight configuration, etc.
For me, his authoritative reference book, Any Shot You Want, from 22 caliber up to 700, is his biggest contribution.

 

[JPmbogo]

Although over the years, I had communicated with the company before its demise, and have owned three of said rifles, I did not realize until very recently that Alphin was even alive, let alone in "business." He could be a source for the occasional discussion on this site re: A-Square rifles, ammo, etc. On the other hand he more likely wants nothing to do with that history. I am familiar with the general demise of A-Square, but I am sure to paraphrase Paul Harvey, there is more to that story than is generally known.